If you face daily challenges such as finding spots to charge or enduring long waiting lines, it’s time to install an EV charger at home. An increasing number of drivers are focusing on installing electric car charging stations directly at home to address these issues head-on.
Here’s a short and simple guide for installing an EV charger – a time and money-saving alternative!
To install an EV charger at home, it is necessary to clean the wall surface where you want to install the EV charger. Attach the reference paper to the wall with tape or glue. Verify that it is level and positioned correctly with the charger’s requirements and measurements.
Then, mark the hole points with a pencil on the wall following the reference paper. Check that the mounting locations on the EV charger’s backplate align with the holes.
Now, use a drill bit size that is appropriate for the designated areas to drill holes in the wall. The diameter of the bolt or anchor you wish to use should be compatible with the size of the drill bit.
Drill the appropriate holes and insert the correct bolts or anchors while installing an EV charger at home. Be mindful that bolts and anchors are designed for specific types of holes and may vary in size or type, so ensure you match each one accordingly.
Take down the wall-mounted reference paper and place the EV charger’s backplate over the anchors or bolts. Secure the backplate to the surface of the wall using the provided screws or any other suitable fasteners.
Note: It is best to have an electrician help with certain essential activities, including checking the electrical, to ensure everything runs safely and efficiently.
After installing the backplate, position the EV charger so that the mounting points are in line with it. Once the backplate is in place, align the mounting points of the EV charger with it. Fasteners are used to secure the EV charger to its backplate, following the manufacturer’s instructions.
The EV charger should be connected to the power source per the manufacturer’s instructions. Make sure every electrical connection is made safely and according to local electrical laws and regulations.
Don’t hesitate to seek out the professional help of a licensed electrician if needed to ensure you properly install an EV Charger at home.
Make sure the EV charger turns on and operates properly before using it. As directed by the manufacturer, set up any preferences or settings. Do a trial charge to ensure the EV charger successfully charges your car.
Now, you are fully prepared to install an EV charger at home. But if you feel like the process is too complicated, you can always call in our professionals. The team at Alas Electric proficiently executes every step of the process so that you can comfortably recharge your e-car without waiting in lines.
Copyright 2024 © All Right Reserved by Alas Electric.